DIAMOND Proportion

Proportion refers to the relationship between the size, shape, and angle of each facet of a diamond. A wide range of combinations are possible, ultimately determining the diamond's interaction with light.

When light strikes a diamond, approximately 20% immediately reflects off the surface (as glare). Of the 80% that enters, a portion will escape through the bottom of the diamond (where the observer cannot appreciate it). A well proportioned diamond will have each facet properly placed and angled so as to maximize the amount of light that reflects back out of the crown (top) of the diamond, to the eye of the observer. This reflected light is perceived as scintillation, fire and brilliance.

In the diagram below, three common light patterns are shown. When light meets any facet of a diamond, it will either reflect (bounce back) or refract (bend while passing through the facet). The angle that the light hits the facet determines whether the majority of light reflects or refracts, which is why cut is so important.

Shallow Diamond Cut

If the diamond cut is too shallow, entering light strikes the pavilion facet at a low angle and passes through the facet (refracts), escaping through the bottom of the diamond.

Deep Diamond Cut

If the diamond cut is too deep, entering light strikes the first pavilion facet at an angle sharp enough to reflect to the second pavilion. But the light strikes the second pavilion at too low an angle, causing the light to refract (pass through the facet), escaping through the bottom of the diamond.

Correct Diamond Cut

In a well cut diamond, the light strikes each pavilion facet at an angle which allows most of the light to reflect back to the crown (top). As it passes through the crown facets at a low angle, the light refracts upon exit. In this case, refraction is a good thing, as the bent light travels to the observer's eye and is perceived as a lively fire.

Learn more about proportion and cut.